what the Rear wheel horsepower on the CBR600F2 (Full Version)

CBR >> Past CBR Models >> CBR 600F2

what the Rear wheel horsepower on the CBR600F2

  

Mountaindew -> what the Rear wheel horsepower on the CBR600F2 (5/8/2005 7:40:28 PM)

I am just wondering what is the rear wheel horsepowe on the CBR600F2? and did the rear wheel horsepower ever change from 91 to 94?

  
sirlimpzalot -> RE: what the Rear wheel horsepower on the CBR600F2 (5/9/2005 12:52:07 AM)

It is in the low to mid 80's ( 84 seems to stick in my head) and CA models have lower numbers due to ignition timing and camshaft profile, ect...

Mountaindew -> RE: what the Rear wheel horsepower on the CBR600F2 (5/9/2005 1:13:17 AM)

From what I have found out from the internet the 600F2 has 74 rwhps, but I want to make sure the numbers are right?? So if anyone has the number for the 600F2 has rwhp, please shair with me.

Mountaindew -> RE: what the Rear wheel horsepower on the CBR600F2 (5/9/2005 1:13:56 AM)

From what I have found out from the internet the 600F2 has 74 rwhps, but I want to make sure the numbers are right?? So if anyone has the number for the 600F2 has rwhp, please shair with me

bgoode11 -> RE: what the Rear wheel horsepower on the CBR600F2 (5/9/2005 9:19:02 PM)

check out this link. it lets you choose what ever year and make of bike and gives you all the stats. tell me what you think.[;)]
http://www.bikez.com/years/index.php

Mountaindew -> RE: what the Rear wheel horsepower on the CBR600F2 (5/10/2005 7:42:27 PM)

Sorry about posting the same thing twice. Thank you bgoode11 for the ink, it's helpful but it didn't say the rwhp. but thank you still

bgoode11 -> RE: what the Rear wheel horsepower on the CBR600F2 (5/11/2005 12:37:49 AM)

sorry i couldnt be of more help but i think sirlimpzalot is probably right. that figure strikes a cord with me too.

Mountaindew -> RE: what the Rear wheel horsepower on the CBR600F2 (5/12/2005 1:33:12 AM)

don't worry about it, You think so? well thats the only thing I could find so It must be ture

loydchristmas -> RE: what the Rear wheel horsepower on the CBR600F2 (5/27/2005 5:52:12 PM)

mine was dynoed at 83hp at the wheel i have a 1992 f2 with full exhuat and jetted

littlecbr -> RE: what the Rear wheel horsepower on the CBR600F2 (5/16/2006 9:42:24 PM)

I know this is an old post but I just recently joined and had some info to share. When Cycle World reviewed the CBR600 F2 '92 they had it listed as 85.2hp RW @ 11,250 RPM. They also have a graphic of the HP and Torque curve.

I had my F2 dynoed in 1998 and it was 87 with 13K miles and a Two Bros pipe and jetkit. If someone is interested, I will find someone with a scanner and post the curves.

'92 F2




shiphteey -> RE: what the Rear wheel horsepower on the CBR600F2 (5/16/2006 11:54:35 PM)

I went into the race shop w/83 hp, left w/89.

92 F2 w/vance & hines ss2r, jetted, K&N and a 94 motor.

A.

toyvette81 -> RE: what the Rear wheel horsepower on the CBR600F2 (9/5/2007 5:55:32 PM)

so did the hp numbers change from 91 to 94?

britman -> RE: what the Rear wheel horsepower on the CBR600F2 (9/6/2007 1:19:51 PM)

my 93 f2 is stock and is quoted as 95bhp (UK).  Not sure how true this is but it's pretty fast

Hershey -> RE: what the Rear wheel horsepower on the CBR600F2 (9/6/2007 1:51:55 PM)

All the reviews I've read for the 93 say something like 90.8 hp at the wheel, and a tad over 100 for crank.

I'd like to get mine dyno'd just to see what it's making.

kjohnson -> RE: what the Rear wheel horsepower on the CBR600F2 (9/6/2007 5:25:59 PM)

It depends on the dyno ,and who did the carbs.

My racebike made 88.7 on pump gas,with a nice linear power delivery, before the motor started to die.Stock motor,Two Bros full system,paper air filter.This was done on a Dynojet 200i eddy-current dyno.Pulled like a truck.

If the dyno is the "standard black" type,it will read optimistic (high). Eddy current dynos are much more accurate.


Current motor makes 101 on the wheel,on pump gas [:D]

  

Page: [1] 2   next >   >>

Return to CBR Forum home page or view the Full Version of this page.