hopefully a simple question

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

hopefully a simple question

Printable Version

CBR Forums >> Current Honda CBR Models >> 1000 Modifications >> hopefully a simple question

Page: [1]

Message

<< Older Topic Newer Topic >>

hopefully a simple question - 4/28/2006 8:30:17 PM

ride4sport

Posts: 164
Joined: 11/10/2005
Status: offline

06 1000RR will the HUGE rear flap simply unbolt for the fender eliminator or am i going to have to cut it up???

_____________________________

OFFICER I HAVE TO RIDE LIKE THAT, MY FRONT TIRE IS FLAT..... 06 CBR 1KRR, cw fender eliminator, yup that's it for now, divorce is sooooo expensive!!!!

Post #: 1

RE: hopefully a simple question - 4/28/2006 9:43:16 PM

05Tribal

Posts: 919
Joined: 5/23/2005
Status: offline

Everything on that bike unbolts. No cutting required. In your case I think the best thing to do first would be to spend some money on the 06 service manual. If you cant wait make sure you have a set of metric Allen wrenches and just take your time. Also depending on which fender eliminator you buy it might come with directions.

_____________________________

2006 Red & Black CBR1000RR
Street Bike With a few mods

2007 White & Silver CBR600RR
For the wife

2005 CBR600RR
Totally for the track!

Columbus, OH

(in reply to ride4sport)

Post #: 2

RE: hopefully a simple question - 5/3/2006 4:00:58 PM

fisherman

Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline

It unbolts but you need to remove the rear seat cowl to get to the bolt that hold the top section and heat shield. Then there are 2 bolts either side which can just be seen under the rear cowl and can be undone without removing the cowl .......... which still needs to come off to get to the top bolt. You see where I'm going..... remove the rear cowl, makes life easy. It is 3 pieces that interconnect, the top piece is gonna flap around without the side pieces, take the top out as well and you probably see some of the heat shield. I have ripped it all out including heat shields to replace my stock exhaust with a full Arata system. Good luck, pm me if you want some pics

(in reply to ride4sport)

Post #: 3