RE: tyre sizes (Full Version)

CBR Forums >> Past CBR Models >> CBR 600F

RE: tyre sizes

  

DC Hurricane -> RE: tyre sizes (9/28/2007 3:01:50 PM)

Do happen to know of a link to a manual that I can download the right one from then?

  
washerinc -> RE: tyre sizes (2/11/2008 3:25:20 PM)

i just bought and installed 150 for my back wheel thanks ill have pics later

ibraud -> RE: tyre sizes (3/9/2008 7:14:45 PM)

On the hurricane i just picked up, the previous owner had some maxxis tires put on. They're actually the same model and sizes as my ninja 500 has. 110/70/17 and 130/70/17

rrasco -> RE: tyre sizes (3/11/2008 2:46:40 PM)

87-90 600F1 Repair Manual

99offroadrngr -> RE: tyre sizes (4/16/2008 7:01:27 PM)

for some reason, dennis kirk says you can get a 180 on there but theres no way on the stock rim im sure.

chris_red -> RE: tyre sizes (4/18/2008 7:24:11 PM)

yea i have a 1989 CBR 600 F and u can go a lettle bigger in the rear and front, what i run is 140/80/17 in the rear and 120/80/17 in the front and it does fine for me.

Gearloose -> Please delete this post (4/26/2008 1:55:01 AM)

[Deleted - mistake]

dalex -> RE: tyre sizes (5/13/2008 8:44:05 AM)

I keep reading very positive reviews about the Michelin Pilot Road 2s (radials). Did anyone have a chance to try them yet?

Currently running Bridgestone Battlax BT45 and due for a change. The Dunlop501s are not an option. I'm only debating between sticking with the Bridgestones (bias ply) or going the Michelin route.

Hurricane rider -> RE: tyre sizes (9/7/2008 10:35:51 AM)

Dalex, how do you like the BT45''''s on yours?

I got mine with a 120/70/17 front and 160/60/17 rear Pirelli Diablo set.  not a bad tire at all. 

I''''m considering the BT45''''s and a few others in a 110/80/17 and 140/80/17 or 150 rear for mine.

Just a side note, the 160 WILL fit the rim, but is not a good size because it is too wide and becomes pinched in the rim, creating potential handling issues.

same for the 120 front.

  

Page: <<   < prev  1 2 [3]

Return to CBR Forum home page or view the Full Version of this page.