CBR Forum   Classifieds   News   Photo Gallery   Search   Member List   Timeslips   Contact   Sponsors   Register   Login  

wind screen

  Printable Version
CBR Forums >> This 'n' That >> Detailing >> wind screen Page: [1]
Login
Message << Older Topic   Newer Topic >>
wind screen - 4/30/2006 8:47:24 PM   
CBR4U2NV


Posts: 14
Joined: 3/22/2006
Status: offline
how do you get the scuffs out of the wind screen
Post #: 1
RE: wind screen - 5/2/2006 4:14:51 AM   
rippn

 

Posts: 742
Joined: 3/12/2006
Status: offline
c...v, well, heres my meager experiance... first, CLEAN YOUR SCREEN !!!!!!!
some screens seam to have a "coating", if yours does... leave it or be ready to romove all of it !!!!!! Next consideration, how deep??? slight scuffs, are erasable, even medium depth, but may cause distortion, dependinding on whereand your patiance.
what your trying to do, is remove enough area around the scuff to make it a fresh unblemished area again. alot like body work but there is no filler material. So... is it a reasonable depth???, can you really catch a finger nail??? I've never paid more than 35$ for a new one, on e-bay( got 3),'cause thats get'n deep, and canleed to the above mentioned distortion.
if its uncoated (most are, i think) and shallow, i use a cheap car buffer/waxer(obital type only) and a paint color coat restoror, I know, maguiers makes a plastic polish and restoror, i have found this stuff is great for the last step befor waxing, as it's very fine. I use the paint stuff, as it's faily course ( no dupont red). a good amount as to not dry out imediatly, buff, for about a min., and wipe clean to see if it's headed toword the desired result. if not... you may have to hand sand w/ 1000 grt. wet and dry, use a block water w/ a spooge ow dawn and don't groove it. pretend ,you are "speading the scratch out", wipe regularly, to see progress. Be looking for any "foriegn feeling" grit, as it will add to your labor. After the paper return topaint restor polish, then a plastic polish, than wax. I blend the scratches into a 3" to 5+" surounding area( blending the distortion) and if you feel comfortable ,in your buffer technique, i hit the whole thing, at the plastic polish stage, then wax. good luck, you can do it!!!!!!!! There are air craft plexiglass restorors out there, but the cost ,i believe, would be more than replacement. I'd love to get a black opaque, 2" shorter from "gufstafson plastics", they will make you any size, - "/ +" and color. Kind of spendy, but superior plastics, ie. product.
if your like me ,you have partial cotainers, of many cleaners, resotors, waxes. try a dab. Be careful of petroliums... I use the same restoration methods on visors. Clean and free, Ripp'n

(in reply to CBR4U2NV)
Post #: 2
Login OR Register now to post a reply to this forum topic.
Page:   [1]

 
CBR Forums >> This 'n' That >> Detailing
Jump to:

Featured Sponsors
Advertising Info

Top 10 Posters
voodoochyl6554
doncollins6230
tahoe sc5842
pitsvtec5318
rrasco5129
d2dgraphix_64879
blue fox4473
vpsophmore4392
chainstretch4153
havoc4145

New Vendors
AMSOIL - Performance Oil Technology
AMSOIL - Performance Oil Technology

CBR Forum .com is not affiliated with or endorsed by Honda Motor Company.