Puig screen

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Puig screen

Printable Version

CBR >> Past CBR Models >> CBR 954RR >> Puig screen

Page: [1]

Message

<< Older Topic Newer Topic >>

Puig screen - 5/4/2006 12:34:44 PM

boobywhoopy

Posts: 10
Joined: 2/24/2005
Status: offline

I put on a new screen from puig on my 02 954 and it doesn't seem to fit right, all the holes seems to line up but there is a space betweend the plastic and the screen in 2 places towards the bottom, I was wondering if anyone has this screen and how it fits? Is it flush.

The space seems to be consistent on both sides on the bottom, from the very low bolt to the 2 bolts on the sides.

thanks

Post #: 1

RE: Puig screen - 5/4/2006 4:39:57 PM

2QK2C

Posts: 5
Joined: 12/29/2005
Status: offline

I have a Puig on mine too, and it has the same problem.

(in reply to boobywhoopy)

Post #: 2

RE: Puig screen - 5/8/2006 2:06:01 PM

boobywhoopy

Posts: 10
Joined: 2/24/2005
Status: offline

quote:

ORIGINAL: 2QK2C

I have a Puig on mine too, and it has the same problem.

good as long as I am not the only one :)

thanks

(in reply to 2QK2C)

Post #: 3

RE: Puig screen - 5/8/2006 2:32:21 PM

fisherman

Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline

Not just on the 954 either, I have bought the smoked double bubble for my 06 1000 RR and it has a 4mm gap all around the bottom. I think it's b#@@$%^* . Puig think it is an acceptable tollerance, the local rep is gonna get it back right where it fits best!

_____________________________

CBR 1000 RR '06
Full Arata Ti with matt black can
Arata rear set
DNA filters
PC III USB
Renthal 42 r & 14 f
Regina x link gold chain
Speedohealer
Acumen gear indicator
Fren Tubo stainless braded brake hoses
Garmin Nuvi 300

(in reply to boobywhoopy)

Post #: 4

RE: Puig screen - 6/6/2006 11:41:41 PM

machfive

Posts: 16
Joined: 6/6/2006
Status: offline

I had the same problem also. Had to torque it a little to get it to fit.

(in reply to boobywhoopy)

Post #: 5

RE: Puig screen - 6/7/2006 9:18:01 PM

matt365

Posts: 141
Joined: 3/13/2006
Status: offline

I had a gap on my 929. I would suggest removing the rubber mounts from the aftermarket screen and attaching the mounts to the rear of the shield. The stock shield mounting holes have an inset mounting hole to account for the rubber grommet. Putting the rubber behind the shield lined up everything for me. I'm betting the 954 Puig screens may have the same issue.

Thumbnail Image