Tank Cvr. Removal for Vibration!!

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Tank Cvr. Removal for Vibration!!

Printable Version

CBR Forums >> Current Honda CBR Models >> CBR 600RR >> Tank Cvr. Removal for Vibration!!

Page: [1]

Message

<< Older Topic Newer Topic >>

Tank Cvr. Removal for Vibration!! - 5/12/2005 2:18:06 PM

peejay

Posts: 104
Joined: 4/9/2005
Status: offline

This Vibration is finally freakin' me out!! Will somebody tell me exactly what is entailed in the removal of the tank cover so I can put something under it! I'm told I also have to take 4 screws off the nozzle hole also...Is this true??

_____________________________

'05 CBR 600RR

Post #: 1

RE: Tank Cvr. Removal for Vibration!! - 5/12/2005 4:01:56 PM

peejay

Posts: 104
Joined: 4/9/2005
Status: offline

_____________________________

'05 CBR 600RR

(in reply to peejay)

Post #: 2

RE: Tank Cvr. Removal for Vibration!! - 5/13/2005 2:50:58 AM

OneWheelinRR

Posts: 364
Joined: 4/28/2005
Status: offline

i belive its 3 screws if i remember correctly... open your tank, see where the screws are longer and take those ones out. take the 2 screws off that are under your tripple tree (you'll know what ones) and then take off your seat, and take the other screws out that are under it (you'll see those too) then you must remove your intake things. be carefull not to break any clips my friend broke mine while helpin me out. if all else fails, yank and pray lol.... they are easy though... just gotta be smooth.

tanks off. oh, and i used a shop rag cut into 4 pieces and stuck it between the plastic and the tank... my VIBRATION was soooo f*ckin annoying... I hated it.

while your at it take off your tail fairing to get used to takin it off, lol... that things a BEATING your first time... unless you get it like i did my first time and its been smooth ever since.

take care, and hope it works for ya's.

(in reply to peejay)

Post #: 3