SpeedoHealer for CBR 1000 RR 2006

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

SpeedoHealer for CBR 1000 RR 2006

Printable Version

CBR Forums >> Current Honda CBR Models >> 1000 Modifications >> SpeedoHealer for CBR 1000 RR 2006

Page: [1]

Message

<< Older Topic Newer Topic >>

SpeedoHealer for CBR 1000 RR 2006 - 5/5/2006 2:49:23 PM

fisherman

Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline

Anyone know if the SpeedoHealer from an 04 CBR 1000 RR will work on an 06 CBR 1000 RR. The plugs are the same but I can't get mine to work.

_____________________________

CBR 1000 RR '06
Full Arata Ti with matt black can
Arata rear set
DNA filters
PC III USB
Renthal 42 r & 14 f
Regina x link gold chain
Speedohealer
Acumen gear indicator
Fren Tubo stainless braded brake hoses
Garmin Nuvi 300

Post #: 1

RE: SpeedoHealer for CBR 1000 RR 2006 - 5/5/2006 4:02:17 PM

MgA_ODEN

2005 Ride Of
The Year
Posts: 2072
Joined: 4/19/2005
From: Spring , Tx
Status: offline

The plugs are the same but I the pins are different (i.e. different color wire to different pin placement)
I think you can change the pin placement , shoot them a e-mail support@speedohealer.com

_____________________________

Black 2004 CBR1000RR

(in reply to fisherman)

Post #: 2

RE: SpeedoHealer for CBR 1000 RR 2006 - 5/5/2006 4:12:46 PM

fisherman

Posts: 117
Joined: 3/26/2006
From: Johannesburg, South Africa
Status: offline

Yep, did that but only expected an answer by Monday, they came back to me in 15 minutes - one minute after the local agent said he was dropping them a mail, all this after normal working hours. Now that is service! Here is the sequence for anyone else that might need it:

"For some odd reason, Honda has reversed the speed sensor connector on the 06 model.
So you have to swap the white and blue wires in the 4p SH connector. To do
this:

Use a very small screwdriver or needle to push the lock ears of the pins back. You do this through the front side of the connector. One pin has two ears.
Once it's done, you can easily pull out the lead.
When the blue and white leads are out, restore the ears to about 45 degree.
Here is photo how it should look like.

Insert the blue and white leads into the 4p SH connector to get the following configuration:
(The socket numbers are printed on the side of the 4p connector)
1 - White
2 - Black
3 - Red
4 - Blue

Here is some more info on the install:
http://www.speedohealer.com/your_pics/cbr1000rr_06/tutorial.htm

_____________________________

CBR 1000 RR '06
Full Arata Ti with matt black can
Arata rear set
DNA filters
PC III USB
Renthal 42 r & 14 f
Regina x link gold chain
Speedohealer
Acumen gear indicator
Fren Tubo stainless braded brake hoses
Garmin Nuvi 300

(in reply to MgA_ODEN)

Post #: 3