My Custom Fender Eliminator!

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

My Custom Fender Eliminator!

Printable Version

CBR >> Current Honda CBR Models >> CBR 600RR >> My Custom Fender Eliminator!

Page: [1]

Message

<< Older Topic Newer Topic >>

My Custom Fender Eliminator! - 5/12/2005 3:28:41 PM

05Siver_Bullet

Posts: 22
Joined: 4/22/2005
Status: offline

hey hey... i was looking at the fender eliminator's and didn't want to pay $100 bucks for a piece of metal with lights... so i made my own, i just took off the plate braket and the fender and put the plate braket right by the turn signals, but you cant bolt it in there so... EPOXY comes into play lol, i hope it will hold the epoxy i bought was like 13 bucks so it better hold... also painted in DUNLOP on the tires, and i added a few SHOWA decals to the front fender and 250ENG to the swing arm! check it out...

_____________________________

http://www.250engineering.com/

Post #: 1

RE: My Custom Fender Eliminator! - 5/12/2005 4:26:19 PM

chainstretcher

Posts: 4557
Joined: 11/5/2004
Status: offline

Looks good. You don't gotta pay $100 for an eliminator kit though. I've seen 'em for as little as $25. $40 with LED lights. Just hope the epoxy holds up to the vibration. I made a tag bracket for a different bike out of 14 ga aluminum. Worked for about 6 mos until it fatigued -- got home and no tag

_____________________________

It's better to burn out ...
Than high side!

(in reply to 05Siver_Bullet)

Post #: 2

RE: My Custom Fender Eliminator! - 5/13/2005 3:04:58 AM

OneWheelinRR

Posts: 364
Joined: 4/28/2005
Status: offline

I wouldnt epoxy... use the 2 bolts where the fender/lights you have on there are bolted to and use aluminum or sheet metal and drill a hole, and make it work... my roomate has that on there.

(in reply to chainstretcher)

Post #: 3