Drag Race (Full Version)

CBR Forum >> Racing and Recreational >> Drag Racing

Drag Race

  

cbr_racin123 -> Drag Race (5/9/2006 2:29:23 AM)

So anyone into or looking to get into drag racin.

Lets hear about mods you have done to set up your bike for the drag track.

  
Black -> RE: Drag Race (5/10/2006 4:18:10 PM)

Sprockets changed up, reverse shift (one up, five down; quicker shifts).

Other than that, I'm a light little dude, so that might help out.

cbr_racin123 -> RE: Drag Race (5/10/2006 6:49:02 PM)

Cool, I have mine about ready for the track. I have a 10 inch over swing arm, and about everything else done. Motor, tranny and I can't wait to see how it works out. Just need to find time to put the quick shifter on, and set it up. Mine is set up for the drag track. should be fun I will post results when I get there. Right now I am busy running my car, but the bike will be next.

QuinC -> RE: Drag Race (5/10/2006 7:03:49 PM)

with the quick shifters you put on, are those the ones where you dont have to let go of the throttle or use the clutch? or they just 1 up 5 down?

cbr_racin123 -> RE: Drag Race (5/10/2006 8:56:38 PM)

Yes, full throttle up shifts. Cuts the ignition for that split second.

Redline954 -> RE: Drag Race (5/17/2006 10:46:35 AM)

I've got the extentions on the swingarm, lowered, air shifter, full exhaust, and a 190 shinko rear tire...ran a 9.8 at the track. I am now having problems with my air shifter...every time I use it the bike kills and won't start. The fuse for the fuel pump blows and I have to change it. Any ideas what could cause this. It started after someone hit my air shifter button when the bike was off. This is a '02 954 by the way.

turbof4i -> RE: Drag Race (8/30/2006 11:47:12 AM)

TURBO. slammed. strapped.

WILDPAIR -> RE: Drag Race (8/30/2006 2:03:06 PM)

3 to 9 swingarm, head done, 39mm flatslides, lowered, rc wheels, 2 brothers pipe and header, tranny, and looking to put nos on here in the next few weeks. still having some carb problems but working on that.

bindelsf2 -> RE: Drag Race (8/30/2006 6:01:50 PM)

yoshimura exhaust, lowered, 5 degree timing advancer, front strap, steering stabilizer, avon semi-slick tire,

swingarm +6" is going to be done soon and NOS [sm=nxsmile.gif] is on the way!!


ClutchBurningRacing -> RE: Drag Race (9/1/2006 8:15:46 AM)

2003 cbr1100xx bored out, JE pistons and rings, Falicon rods, cnc'd deck and block, pro cut tranny, stage IV injectors and fuel rail, fmu, 2 stage turbo, cable clutch conversion, Trac 10 over arm, Pingle air shifter, lock-up clutch, Wave rotor, Air Tech 8 over glass tail, Air Tech glass race tank, Zero Gravity screen, Dyna shift light, Shiko 003 190 rear and low profile front, Schnitz front strap.

Mods in the works
clutch basket, dual ball bearing turbo, boost control, cut forks, RC wheels

any and donations are welcome!

bindelsf2 -> RE: Drag Race (9/1/2006 1:43:22 PM)

all i have to say is DDDDDDDDDDDAAAAAAAAAAAAAAAAMMMMMMMMMMMMNNNNNNNNNNNNNNNNNNNN!!!![sm=drooldude.gif][sm=hail.gif][sm=jawdrop.gif]

bindelsf2 -> RE: Drag Race (9/2/2006 5:51:55 PM)

ok i am getting sick of being a little slower, so i am putting a 900RR in the F2 this winter.. i already looking into the amount of time and money and its alot more cost efficent than buying a new bike( like i was going to do)..

plus who is going to expect that out of a 94 600F2...

ClutchBurningRacing -> RE: Drag Race (9/4/2006 11:13:23 PM)

There has been an old Katana floating around here for awhile kinda like that. It has changed hands a few times, but the motor came from a freind of mine. It keeps showing up at money races and they think no one will notice. A 600 Katana with a 1340 Suz motor with 15:1 comp. Trying to enter the stock 600 class. RRRRRIIIGHT! I seen that thing blow away many a Busa.

WILDPAIR -> RE: Drag Race (9/5/2006 1:27:19 PM)

that sounds alot like my last bike. took a 93 gsxr 600 and mounted a 1200 bandit motor on that frame. ported the head put next size over pistons change the exhust cam. change the clutch toa 1100 katana cable 10" swingarm sidewinder pipe, nos, rc wheels, electron carbs, with all the plastic you really couldnt see motor to good and with fluid clutch not many people could tell the difference and with the sidewinder is was so loud. won alot of money with that bike hated to get rid of it.

mitch_1100xx -> RE: Drag Race (9/7/2006 2:57:08 PM)

lets see some of these bikes guys, sounds like all of you have some pretty serious rides.

my bike is stretched (+8), slammed, nitrous(40 wet), etc


hey clutch burn racing, i see you have a 190 ser on your ride, are you running that on the stock rim or did you change it off? and if you changed it off do you know of a place that makes aftermarket rims for the xx, i have become passionate about a 190 - 210 series tire on mine but cant figure out a way to do it that doesnt involve ripping apart everthing that has already been done.

  

Page: [1] 2   next >   >>

Return to CBR Forum home page or view the Full Version of this page.