Rear Sprocket

CBR Forum Classifieds News Photo Gallery Search Member List Timeslips Contact Sponsors Register Login

Rear Sprocket

Printable Version

CBR Forums >> Past CBR Models >> CBR 929RR >> Rear Sprocket

Page: [1]

Message

<< Older Topic Newer Topic >>

Rear Sprocket - 5/16/2005 2:44:59 PM

alexnigma

Posts: 2
Joined: 5/16/2005
Status: offline

Hi all. New to the Forum, but there does appear to be a lot of good info around here. Anyway onto my question. The rear sprocket on my Blade is a little bit spotty what I mean is that the previous owner had left it standing and the sprocket has a few white spots on it and I have given it a good scrub, but it will not shift. I have only had it for a couple of months and I want to sort it out so what would you recommend to get it off. I thought maybe a wire brush, but I do not want to be too rough.

All good ideas greatfully appreciated.

Post #: 1

RE: Rear Sprocket - 5/17/2005 7:30:40 PM

MapJr

Posts: 941
Joined: 2/17/2005
Status: offline

Use Castrol Super Clean and scrub lightly with a wire brush. You'll do no damage. The cleaner/degreaser will do the scrubbing for you. Look at the picture of it below.

Attachment (1)

_____________________________

To ride or not to ride......isn't a question!

(in reply to alexnigma)

Post #: 2

RE: Rear Sprocket - 5/17/2005 11:06:17 PM

mhcbrf2

Posts: 53
Joined: 3/25/2005
Status: offline

Just be careful with it it will dull any polished alu.

_____________________________

97 CBR 900rr
LE front forks
Penske racing shock
Factory pro jet kit with air filter kit
Micron carbon & stanless pipe
4 degree advance plate
Brembo brakes
PM wheels
corbon seat
LED's front & rear
Raked in with a Two Brothers triple tr

(in reply to MapJr)